Manual configuration
1.
On the control panel, press
OK
.
2.
Use the arrow buttons to select Network config., and then press
OK
.
3.
Use the arrow buttons to select CFG TCP/IP, and then press
OK
.
4.
Use the arrow buttons to select BOOTP, make sure the value is No, and then press
OK
.
5.
Use the arrow buttons to select DHCP, make sure the value is No, and then press
OK
.
6.
Use the arrow buttons to select IP BYTE 1, and then press
OK
.
7.
Use the arrow buttons to change the value of IP BYTE 1, and then press
OK
.
8.
Repeat steps 6 and 7 for IP BYTE 2, IP BYTE 3, and IP BYTE 4. Also, repeat steps 6 and 7 for
the Subnet Mask (SM BYTE 1, SM BYTE 2, SM BYTE 3, SM BYTE 4) and Default Gateway (GW
BYTE 1, GW BYTE 2, GW BYTE 3, GW BYTE 4).
9.
Use the
Back
or
Cancel
button to leave the Network config. menu.