Service menu
Use this menu to restore default settings, clean the product, and activate special modes that affect print
output.
Menu item
Description
Cleaning mode
Use this option to clean the product if you see toner specks or other marks on the
printed output. The cleaning process removes dust and excess toner from the paper
path.
When you select this item, the product prompts you to load plain paper in Tray 1 and
then press
OK
to start the cleaning process. Wait until the process is complete.
Discard the page that prints.
USB speed
Sets the USB speed to High or Full. For the product to actually operate at high
speed, it must have high speed enabled and be connected to an EHCI host controller
that is also operating at high speed. This menu item also does not reflect the current
operating speed of the product.
The default setting is High.
Less paper curl
If printed pages are consistently curled, use this option to set the product to a mode
that reduces curl.
The default setting is Off.
Archive print
If you are printing pages that will be stored for a long time, use this option to set the
product to a mode that reduces toner smearing and dusting.
The default setting is Off.
Restore defaults
Resets all customized settings to the factory default values.
ENWW
Service menu
15