Clean the Tray 1 pickup roller
If the product is having trouble picking up paper from Tray 1, follow these instructions.
1.
Turn the product off, disconnect the power cord, and wait for the product to cool.
–10
10
20
30
40
50
60
70
80
90
100
0
Celcius
°C
2.
Push the button to open the print-cartridge door, and then remove the print cartridge.
CAUTION:
Do not touch the black sponge-transfer roller inside the product. Doing so can
damage the product.
CAUTION:
To prevent damage, do not expose the print cartridge to light. Cover it with a piece
of paper.
3.
Lift the pickup roller cover.
92
Chapter 9 Manage and maintain the product
ENWW
4.
Press the two black retaining tabs outward until the pickup roller is released from its seat.
5.
Remove the pickup roller from the product.
6.
Dab a lint-free cloth in water, and scrub the roller.
NOTE:
Do not touch the surface of the roller with bare fingers.
7.
Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.
ENWW
Clean the product
93
8.
Allow the pickup roller to dry completely.
9.
Line up the black retaining tabs in the product with the grooves in the pickup roller, and then press
the pickup roller into the pickup roller seat until the retaining tabs click.
10.
Close the pickup roller cover.
11.
Reinstall the print cartridge, and close the print-cartridge door.
94
Chapter 9 Manage and maintain the product
ENWW
12.
Reconnect the power cord, and turn the product on.