Check DIMM installation
After installing the DIMM, make sure that the installation was successful.
1.
Turn the product on. Check that the Ready light is illuminated after the product has gone through
the startup sequence. If an error message appears, a DIMM might have been incorrectly installed.
See
Interpret control-panel messages on page 102
.
2.
Print a configuration page (see
Print the information pages on page 70
).
3.
Check the memory section on the configuration page and compare it to the configuration page that
was printed before the memory installation. If the amount of memory has not increased, the DIMM
might not be installed correctly, or the DIMM might be defective. Repeat the installation procedure.
If necessary, install a different DIMM.
NOTE:
If you installed a product language (personality), check the "Installed Personalities and
Options" section on the configuration page. This area should list the new product language.