HP LaserJet P2055 Printer series - Repack the product

background image

Repack the product

If HP Customer Care determines that your product needs to be returned to HP for repair, follow these
steps to repack the product before shipping it.


Shipping damage as a result of inadequate packing is the customer’s responsibility.


Remove and retain any DIMMs cards that you have purchased and installed in the device. Do not
remove the DIMM that came with the device.


Static electricity can damage DIMMs. When handling DIMMs, either wear an antistatic

wrist strap, or frequently touch the surface of the DIMM antistatic package and then touch bare
metal on the device. To remove the DIMMs, see

Install memory on page 85



Remove and retain the print cartridge.


It is extremely important to remove the print cartridge before shipping the product. A

print cartridge that remains in the product during shipping can leak and cover the product engine
and other parts with toner.

To prevent damage to the print cartridge, avoid touching the roller on it, and store the print cartridge
in its original packing material or so that it is not exposed to light.


Remove and retain the power cable, interface cable, and optional accessories.


If possible, include print samples and 50 to 100 sheets of paper or other print media that did not
print correctly.


In the U.S., call HP Customer Care to request new packing material. In other areas, use the original
packing material, if possible. Hewlett-Packard recommends insuring the equipment for shipment.

142 Appendix B Service and support