Automatic configuration
1.
On the control panel, press
OK
.
2.
Use the arrow buttons to select Network config., and then press
OK
.
3.
Use the arrow buttons to select either BOOTP or DHCP, and then press
OK
.
4.
Use the arrow buttons to select Yes, and then press
OK
.
It may take several minutes before the automatic IP address is ready for use.
5.
Use the
Back
or
Cancel
button to leave the Network config. menu.
NOTE:
Specific automatic IP modes (such as BOOTP, DHCP, or AutoIP) can be changed by using
the embedded Web server or HP ToolboxFX only. If AutoIP is disabled, HP default IP (192.0.0.192) will
automatically be enabled.